← All posts

Subcontractor Insurance: What Subs Need, What GCs Require, and Who Covers What

What insurance a subcontractor needs, what general contractors write into subcontracts, whether a GC's policy covers its subs, what happens at audit when a sub is uninsured, and how both sides check that the coverage on a certificate is real.

Reviewed by Iffi Wahla, Licensed P&C insurance producer

Subcontractor Insurance: What Subs Need, What GCs Require, and Who Covers What

Quick answer: Subcontractors need their own insurance. A general contractor's policy protects the GC, not the subs it hires: Westfield, a commercial carrier, says subcontractors are typically not covered under the contractor's insurance policy. Most subcontracts require at least general liability with the GC as an additional insured, workers' comp if you have employees, commercial auto for work vehicles, and often an umbrella. If a sub shows up without coverage, the GC's own carrier may charge for that sub's work at audit, and in many states the GC can owe workers' comp benefits to the sub's injured employees.

This guide is for both sides of the subcontract: the trade contractor meeting a GC's requirements, and the GC checking that every sub carries what the contract asks for. For contractor GL cost by trade, see our guide to general liability insurance for contractors.


What insurance do subcontractors need?

There is no single policy called "subcontractor insurance." It is the set of policies a trade contractor carries for its own business, shaped by two things: what state law requires, and what the GCs and owners you work for write into their subcontracts. In practice the contract usually asks for more than the law does. The core set looks like this:

PolicyWhat it covers for a subWho usually requires it
General liability (GL)Injury or property damage to third parties caused by your work, during the job and after it is finished (completed operations)Almost every GC subcontract; some state licensing boards
Workers' compensationMedical bills and lost wages for your own employees hurt on the jobState law once you have employees; most GC subcontracts, often even for one-person subs
Commercial autoLiability and damage involving the trucks, vans and trailers you use for workState law for registered vehicles; GC subcontracts that list auto limits
Umbrella or excess liabilityExtra limits above GL, auto and employers liabilityLarger jobs and commercial or public projects
Tools and equipment (inland marine)Theft or damage to your own tools and equipment, on site or in transitRarely required, but GL does not cover your own gear
Professional liabilityErrors in design or consulting workDesign-build, engineering and some specialty trades

Westfield's guidance lists the same building blocks for subs: workers' compensation for subs with employees, commercial auto for vehicles used on jobsites or to haul materials, and professional liability for subs that provide design or consulting services. NEXT notes that many licensing boards mandate general liability coverage and workers' compensation, with the details set state by state.

For vehicles, see our guide to commercial auto insurance for contractors; for tools, our inland marine guide.


Subcontractor liability insurance: what the GL policy has to include

For most subs, general liability is the policy GCs read most closely, because it is the one that protects the GC too. A GL policy with the right limits is not enough on its own. The subcontract will usually name specific endorsements, and the certificate is checked against them. These are the requirements that show up again and again:

  • Limits of $1 million per occurrence and $2 million aggregate. This is the most common baseline, and it matches the limits Insureon reports on its typical contractor policy. Larger or riskier jobs raise it or add an umbrella.
  • Additional insured for ongoing operations (CG 20 10). This makes the GC, and often the owner, an insured under your policy for liability arising from your work while it is in progress. IRMI notes the form covers only "your ongoing operations", so it stops when the job is done.
  • Additional insured for completed operations (CG 20 37). IRMI describes CG 20 37 as the form that restored completed operations coverage for the additional insured. GCs want it because claims from a sub's work can surface years after the sub has left the site.
  • Primary and non-contributory wording. Your policy pays first and does not seek contribution from the GC's policy. ISO's CG 20 01 endorsement provides this when a written contract requires it.
  • Waiver of subrogation. Your insurer gives up its right to recover from the GC after paying a claim. Read our waiver of subrogation guide before you sign one.

Since the 2013 ISO additional insured editions, additional insured coverage applies only to the extent permitted by law and is no broader than the written contract requires. So the subcontract wording and your endorsements have to line up, and the subcontract should be signed before work starts. Our guide to the additional insured problem explains what you give away when you add someone.

Also read the exclusions on your own policy before you bid. A residential, action-over or classification limitation endorsement on your GL can leave the GC with no additional insured coverage for that job; our contractor GL guide explains each one.


Does general contractor insurance cover subcontractors?

Generally, no. The GC's general liability policy insures the GC. It can respond when the GC is sued over a sub's work, because the GC is still responsible for the project, but it does not insure the subcontractor's own liability, the sub's employees or the sub's tools. Westfield puts it directly: subcontractors operate independently and are typically not covered under the contractor's policy. NEXT adds that general contractors aren't required to cover subs under their own insurance.

That is the answer for the sub. For the GC, the more important point is the reverse: an uninsured sub does not stay the sub's problem. There are three ways it comes back to the GC.

1. Liability for the sub's work

If an uninsured sub causes injury or property damage, Westfield says the general contractor may be held responsible for the resulting costs, and NEXT warns that GCs who hire uninsured subs may be held liable for their claims. The GC's own policy, loss history and renewal pricing then carry a claim that should have been the sub's.

2. The audit charge on the GC's own GL and comp

Contractor GL and workers' comp are priced on estimates and then audited. Under the ISO rules summarized by the Big I, adequately insured subs are charged under the subcontracted-work classification on a total cost basis, while inadequately insured subs are charged under the classification for the work they performed, with payroll as the basis. That second rate is usually much higher. On the comp side, Nationwide says that with no evidence of the sub's insurance, its payroll may be added to your premium base. Our contractor premium audit guide walks through how auditors treat sub costs and what records they accept.

3. Statutory employer rules for workers' comp

Most states protect the employees of an uninsured sub by making the contractor above it responsible for their workers' comp benefits. This is often called "statutory employer" or "up-the-ladder" liability. Florida's statute is a clear example: when a contractor sublets work, it is liable for compensation to the sub's employees unless the sub has secured coverage. Texas takes a different approach and lets a GC and sub agree in writing that the GC will provide coverage and deduct the cost, under Texas Labor Code 406.123. Our guide to workers' comp for 1099 subcontractors covers the state rules in detail.

The main exception is a wrap-up. On an owner or contractor controlled insurance program (OCIP or CCIP), the sponsor buys coverage for everyone enrolled on that one project, and subs still need their own policies for everything else. See our guide to OCIP and CCIP wrap-ups for subcontractors.


General contractor insurance requirements: what the GC itself must carry

GCs set requirements for their subs, but they face requirements of their own from licensing boards and from the owners who hire them. Several of the 16 states where Aiden is licensed make general liability a condition of a contractor license or registration. These are legal floors, and owner contracts usually ask for far more.

StateWho it applies toMinimum GL required
MarylandLicensed home improvement contractors and applicantsAt least $500,000, raised from $50,000 effective October 1, 2024
New JerseyRegistered home improvement contractors$500,000 per occurrence on an occurrence-form CGL policy
FloridaCertified and registered contractors$300,000 liability and $50,000 property damage for general and building contractors; $100,000 and $25,000 for residential, roofing, plumbing and most specialty contractors
WashingtonRegistered contractors$100,000 per person, $200,000 for more than one person, and $50,000 property damage
CaliforniaWorkers' comp or an exemption for every active license; GL required only for LLC licenseesSee our California contractor insurance requirements guide

Rules change, and cities and counties can add their own. Confirm with your licensing board before you apply or renew.

Owner and public contracts are where the bigger numbers come from. The California Department of General Services publishes sample contract insurance requirements for state work and tells contractors to send the insurance section to their insurance provider before bidding. That is good practice for any GC, and so is checking that what you pass down to subs matches what the owner expects. Our general contractor insurance page covers the full GC program.


What GCs typically write into a subcontract

A well-built subcontract insurance section covers more than limits. Look for:

  1. Policies and limits: GL, auto, employers liability and umbrella.
  2. Endorsements: additional insured for ongoing and completed operations, primary and non-contributory, and waivers of subrogation.
  3. Completed operations duration: how many years after the job the additional insured coverage must stay in place.
  4. Indemnity: state anti-indemnity laws limit how far this can go; see our guide to the Texas Anti-Indemnity Act.
  5. Proof and flow-down: certificates and endorsement copies before work starts, and the same requirements passed down to any sub-subcontractors.

For subs, send each subcontract's insurance section to your broker before you sign. A limit or endorsement you cannot meet is far easier to negotiate before signing than after the GC rejects your certificate.


1099 subs, employees and the misclassification risk

Many small subs are one-person operations paid on a 1099. That does not settle whether they are an independent business or, legally, your employee. The IRS common-law test weighs behavioral control, financial control and the type of relationship. The U.S. Department of Labor states that misclassification occurs when an employer treats a worker who is an employee as an independent contractor for wage and hour purposes.

Insurance follows a similar logic. Nationwide's premium audit guidance says that, depending on state law, a person called a subcontractor who has no employees of their own and whose duties closely resemble your employees' may be treated as your employee for audit purposes. Some states go further for construction. California's Labor Code 2750.5 presumes a worker doing licensed contractor work is an employee. Florida's Division of Workers' Compensation treats sole proprietors and independent contractors in construction as employees, with exemptions only for qualifying corporate or LLC officers.

For a one-person sub, the practical answer is to carry your own policies, or hold a valid state exemption where one exists, and give the GC proof before you start. Our guide to workers' comp for 1099 subcontractors covers the state tests and exemptions.


How much subcontractor insurance costs

No source publishes a price for "subcontractor insurance" as such, because it is a bundle of policies priced by trade. The published averages below are for contractors in general. Each source measures a different customer pool, so read each figure on its own and do not add them together.

PolicyPublished figureSource and what it measures
General liabilityAbout $1,351 a year, $113 a monthThe Hartford, average for construction businesses
General liability$83 a month, $990 a yearInsureon, median of policies bought by its contractor customers
Workers' compensation$160 a month, $1,916 a yearInsureon, median of policies bought by its contractor customers
Commercial autoAbout $574 a month, $6,884 a yearThe Hartford, average across all industries
Commercial auto$270 a month, $3,239 a yearInsureon, median of policies bought by its contractor customers
Commercial umbrella$92 a monthInsureon, median of policies bought by its contractor customers
Tools and equipment (inland marine)$42 a month, $502 a yearInsureon, median of policies bought by its contractor customers

Insureon says its contractor figures come from more than 25,000 small contractor customers, most with fewer than five employees, so they skew toward small operations. Trade moves the GL number a lot; our contractor GL cost table breaks it out for roofers, plumbers, electricians, HVAC contractors, painters and GCs.

Your actual premium depends on your trade class code, payroll and sales, what you sublet, your limits and endorsements, your vehicles and your claims history. Our workers' comp cost estimator gives a starting range for comp.


How to verify a subcontractor's insurance

A certificate of insurance is evidence, not coverage. Westfield cautions that a certificate on its own does not prove coverage and recommends asking for the policy endorsements and exclusions too, especially for general liability. A practical checklist for GCs:

  1. Collect before mobilizing. Get the certificate and endorsement copies before the sub sets foot on site, not with the first pay application.
  2. Match the named insured to the legal name on the subcontract and the contractor license.
  3. Check the dates. AmTrust's subcontractor guidance says certificate dates must span the entire time the sub worked, and if the policy expires mid-job you need a new certificate showing the renewal.
  4. Compare limits and endorsements to the subcontract: CG 20 10, CG 20 37, primary and non-contributory, and waiver of subrogation, by form number where the contract names one.
  5. Verify comp with the state where you can. Washington L&I tells GCs to check a sub's certificate of coverage and offers tracking alerts, and Florida publishes proof of coverage and valid exemptions online.
  6. Keep the records together for each job and policy year, because the auditor will ask for them. Our contractor premium audit guide lists what carriers want to see.

Our certificate of insurance guide explains how to read each box on an ACORD 25. To run a quick check, the free COI checker grades a certificate against your contract requirements from a few answers you give about it, and flags likely gaps to raise with the sub or your broker.


How Aiden Risk Solves Each of These Problems

Most subcontractor insurance problems come from a mismatch between the contract and the policy, not from the price. Aiden Risk is an AI-native independent commercial insurance broker that pairs an AI risk engine built for commercial insurance with a licensed broker on every account.

The problemHow Aiden Risk solves it
Subs assuming the GC's policy covers themYour licensed broker builds your own GL, workers' comp, auto and umbrella program around the work you actually do.
Subcontracts requiring CG 20 10, CG 20 37, primary and non-contributory wording and waiversYour broker reviews the contract requirements and lines up endorsements that match them before you sign or mobilize.
Exclusions on a sub's GL that void the GC's additional insured coverageA coverage gap analysis checks the forms on every quote, and your broker explains what each endorsement removes.
Audit charges on the GC's policy for uninsured subsYour broker helps you set up certificate collection and reviews your subcontract cost estimates before renewal.
Statutory employer exposure for an uninsured sub's crewYour broker reviews how your state treats uninsured subs and how your workers' comp program handles them.
1099 workers who may count as employeesYour broker reviews how your workers are classified on your comp policy before the auditor does.
Certificates that do not match the contractThe free COI checker grades a certificate against your contract requirements from a few answers, and your broker follows up on the gaps.
Premiums that climb as you take on bigger GC workThe AI monitors risk signals through the year, and your broker remarkets the program across 100+ carriers when the numbers justify it.

Aiden Risk charges no fee to work with it, with no platform fee or subscription; it is paid through standard carrier commissions. We place coverage across 100+ carriers and 13 commercial lines, and we are licensed in 16 states, listed on our licenses page.

Key Takeaways

  • A general contractor's policy generally does not cover its subcontractors; subs need their own GL, workers' comp if they have employees, commercial auto and often an umbrella.
  • GCs commonly require $1 million / $2 million GL limits, CG 20 10 and CG 20 37 additional insured status, primary and non-contributory wording and a waiver of subrogation.
  • An uninsured sub can cost the GC three ways: liability for the sub's work, a higher audit charge on the GC's GL and comp, and statutory employer liability for the sub's injured workers.
  • A 1099 does not make a worker an independent contractor; Nationwide may treat a one-person sub who works like your employee as your employee at audit.
  • A certificate is evidence, not coverage. Check names, dates, limits and endorsement form numbers against the subcontract before work starts.
  • If your subcontracts and your policies do not line up, Aiden Risk's licensed brokers review the contract requirements and endorsements, and the AI keeps watching your risk signals all year so the gaps surface before a claim or an audit does.

FAQs

Does general contractor insurance cover subcontractors?

Generally, no. A GC's general liability policy insures the GC, including when it is sued over a sub's work, but it does not insure the subcontractor's own liability, employees or equipment. Subs need their own policies, and most GCs require them in the subcontract.

What insurance do subcontractors need?

Most subs need general liability, workers' comp if they have employees, and commercial auto for work vehicles. Many subcontracts also require an umbrella and GL endorsements such as additional insured status for the GC.

What is subcontractor liability insurance?

It is the subcontractor's own general liability policy. It covers injury and property damage to others caused by the sub's work, during the job and after it is finished. GCs usually require it at $1 million per occurrence and $2 million aggregate, with the GC added as an additional insured.

What insurance requirements do general contractors have for subcontractors?

Commonly GL at $1 million per occurrence and $2 million aggregate, additional insured status under CG 20 10 and CG 20 37, primary and non-contributory wording, a waiver of subrogation, workers' comp, auto liability and often an umbrella. The subcontract sets the exact terms.

What happens if a subcontractor does not have insurance?

The GC can be held responsible for the sub's injuries and damage, its carrier may charge for the sub's work at audit, and in many states the GC owes workers' comp benefits to the sub's injured employees. That is why GCs collect certificates before work starts.

Can a general contractor add a subcontractor to its own policy?

Sometimes, but it is not the norm. A wrap-up program (OCIP or CCIP) can cover enrolled subs for one project, and Texas lets a GC and sub agree in writing that the GC will provide comp coverage. Otherwise subs carry their own policies and name the GC as an additional insured.

Do 1099 subcontractors need workers' comp?

It depends on the state. A one-person sub may not be legally required to carry it, but many GCs require it, and some states treat construction workers as employees unless they meet strict tests or hold an exemption.

How much does subcontractor insurance cost?

There is no single price because it is several policies. The Hartford reports construction businesses pay about $1,351 a year for GL on average, and Insureon reports contractor medians of $160 a month for workers' comp and $270 a month for commercial auto. Your trade, payroll, vehicles and claims drive the real number.


Signing a subcontract with insurance requirements you are not sure you meet? Start with our contractor insurance page: a 5-minute intake, a licensed broker on your account, and limits and endorsements matched to the GC contracts you actually sign.

Want a risk assessment for your business?

Aiden's AI risk engine analyzes 140+ data vectors to surface coverage gaps before a claim forces the question.

Analyze Your Risk →or talk to a broker now: (650) 292-2812